Skip to main content

#359 Absol

Hey!

I come here with a cute absol pattern for you guys this time!

If you're enjoying all my pattern posts, please consider supporting me!

Buy Me a Coffee at ko-fi.com

Absol took a few rework to get it to look how I wanted it to. This one takes a little more fiddling so you may wish to start with one of my other patterns (such as some of the eeveelutions or the pokedoll clefairy) if you're new to crochet!

And here's the pattern:

Head
Blue
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: [2SC, SCx3]x6 (30)
Round 6: [2SC, SCx4]x6 (36)
Round 7: [2SC, SCx5]x6(42)
Round 8: [2SC, SCx6]x6 (48)
Round 9 - 13: SCx48 (48, 5 rounds)
Round 14: SCx42, 2SC, SCx5 (49) 
Round 15: SCx42, 2SCx2, SCx5 (51)
Round 16: SCx44, 2SCx3, SCx4 (54)
Round 17: [SC2tog, SCx7]x6 (48)
Round 18: [SC2tog, SCx6]x6 (42)
Round 19: [SC2tog, SCx5]x6 (36)
Round 20: [SC2tog, SCx4]x6 (30)
Round 21: [SC2tog, SCx3]x6 (24)
Round 22: [SC2tog, SCx2]x6 (18)
Stuff firmly and make sure the nose point is in the right place. That would be the increases in rounds 15 and 16.
Round 23: [SC2tog, SC]x6 (12)
Round 24: SC2togx6 (6)
Sew closed and leave a tail to sew onto the fur piece later on.

Facial Feature
I embroidered on the nose and mouth. The eyes are needlefelted on.

Hair Piece
White
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4 - 5: SCx18 (18, 2 rounds)
Round 6: [2SC, SCx2]x6 (24)
Round 7: [2SC, SCx3]x6 (30)
Round 8: [2SC, SCx4]x6 (36)
Round 9: [2SC, SCx5]x6 (42)
Round 11 - 25: SCx42 (42, 15 rounds)
Short Rows to turn the hair piece.
Row 1: SCx28, chain and turn (28)
Row 2: SCx27, chain and turn (27)
Row 3: SCx26, chain and turn (26)
Row 4: SCx25, chain and turn (25)
Row 5: SCx24, chain and turn (24)
Row 6: SCx23, chain and turn (23)
Row 7: SCx23, pick up the next 2 stitches going down the steps and then crochet back down on to round 25, SCx14 (39)
Round 26: SC, pick up the 2x stitches going up the steps then continue up on to the stitches of row 7, SCx39 (42)
Lightly stuff the hair piece up until just before the short rounds to hold the shape and then continue.
Round 27 - 31: SCx42 (42, 9 rounds)
Round 32 : SCx5 chain and turn then continue into the next row. This is an incomplete round.
Short Rows - this attaches to the front of the body to make the head stand up more upright.
Row 1: SCx20, chain and turn (20)
Row 2: SCx19, chain and turn (19)
Row 3: SCx18, chain and turn (18)
Row 4: SCx17, chain and turn (17)
Row 5: SCx16, chain and turn (16)
Row 6: SCx15, chain and turn (15)

Leave a long tail and finish off. Use a separate long white thread to sew the head piece in position to the head. This will make it easier to attach the other pieces later. Then sew the head to the body. There will be a gap where the chest piece slots into.



Body
This piece starts from the back and and works towards the chest.
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: [2SC, SCx3]x6 (30)
Round 6: [2SC, SCx4]x6 (36)
Round 7: [2SC, SCx5]x6 (42)
Round 8 - 17: SCx42 (42, 10 rounds)
Round 18: [2SC, SCx6]x3, SCx21 (45)
You may wish to add an extra stitch marker about 9 stitches into round 13 as that will be bottom of the piece when sewing together. The increases is where the stomach/chest is.
Round 19: [2SC, SCx6]x3, SCx24 (48)
Round 20: [2SC, SCx7]x3. SCx24 (51)
Round 21: [2SC, SCx7]x3, SCx27 (54)
Round 22 - 31: SCx54 (54, 10 rounds)
Round 32: [SC2tog, SCx7]x6 (48)
Round 33: [SC2tog, SCx6]x6 (42)
Round 34: [SC2tog, SCx5]x6 (36)
Round 35: [SC2tog, SCx4]x6 (30)
Round 36: [SC2tog, SCx3]x6 (24)
Round 37: [SC2tog, SCx2]x6 (18)
Stuff firmly.
Round 38: [SC2tog, SC]x6 (12)
Round 39: SC2togx6 (6)
Sew closed and finish off the thread. Sew the head piece onto the front of the body. 




Chest Piece
White
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3 - 4 : SCx12 (12, 2 rounds)
Round 5: [2SC, SC]x6 (18)
Round 6 - 7: SCx18 (18, 2 rounds)
Round 8: [2SC, SCx2]x6 (24)
Round 9: SCx24 (24)
Round 10: [2SC, SCx3]x6 (30)
Round 11: SCx30 (30)
Round 12: [2SC, SCx4]x6 (36)
Round 13 - 17: SCx36 (36, 5 rounds)
Round 18: [SC2tog, SCx4]x6 (30)
Round 19 - 22: SCx30 (30, 4 rounds)
Stuff lightly and sew onto the front of the chest and up onto the head piece. Then use the leftover blue thread from the head to sew slightly down onto the chest piece.

Hair Side Piece
White
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Round 3: 2SCx6 (12)
Round 4: SCx12 (12)
Round 5: DCx6, SCx6 (12)
Round 6: [2SC, SC]x3, SC2togx3 (12)
Round 7 - 8: DCx6, SCx6 (12, 2 rounds)
Round 9 - 11: SCx12 (12, 3 rounds)
Flatten and sew onto the head. 

Head Piece
Blue
Start by leaving a tail for sewing
Round 1: Chain 12 and join to form a ring. (12)
Round 2 - 10: SCx12 (12, 8 rounds)
Sew to the head and stuff firmly. I also added a small popstick piece in to add some strength. 

Blue
Chainx9
Round 1: From the 2nd chain from the hook, SCx7, 3SC then continue around the other side, SCx7, 3SC (20)
Round 2 - 8: SCx20 (20, 6 rounds)
Round 9 - 10: DCx4, SCx 12, DCx4 (20, 2 rounds)
Round 11: DCx4, SCx5, SC2tog, SCx5, DCx4 (19)
Round 12: SCx 19 (19)
Round 13: DCx4, SCx4, SC2tog, SCx5, DCx4 (18) DCx1 and move the stitch marker. This is the start to the next round.
Round 14: SCx18 (18)
Round 15: DCx4, SCx4, SC2tog, SCx4, DCx4 (17)
Round 16: SCx17 (17)
Round 17: DCx4, SCx4, SC2tog, SCx3, DCx4 (16)
Round 18: SCx16 (16)
Round 19: DCx3, SCx4, SC2tog,SCx4, DCx3 (15)
Round 20: SCx15 (15)
Round 21: DCx3, SCx4 SC2tog, SCx3, DCx3 (14)
Round 22: SCx14 (14)
Round 23: DCx3, SCx3 SC2tog, SCx3, DCx3 (13)
Stuff lightly. I also added a popstick down the centre to add a bit of strength but I think it would also still hold up without it.
Round 24: SCx13 (13)
Round 25: DCx3, SCx3 SC2tog, SCx2, DCx3 (12)
Round 24: SCx12 (12)
Round 25: SC2togx6 (6)
Round 26: SCx6 (6)
Finish off this thread. Then use the remaining thread from the blue tube earlier to sew the corner of this piece into the tube. 




Neck Spikes
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Round 3: [2SC, SC]x3 (9)
Round 4 - 5: SCx9 (9, 2 rounds)
Round 6: [2SC, SCx2]x3 (12)
Round 7 - 8: SCx12 (2 rounds)
Make as many as you think would look nice around the back. I made 11, 6 on the bottom row and then 5 on the top. Stuff firmly to sew on. 

Head Ornament
Blue
Chainx6
Round 1: From the 2nd chain from the hook SCx4, 3SC, SCx4, 3SC
Sew onto the head. 



Front Leg
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: SCx24 (24)
Round 6: SC2togx6, SCx12 (18)
Round 7: SC2togx3, SCx12 (15)
Round 8 - 17: SCx15 (15, 10 rounds)
Stuff firmly and sew onto the body. The inner part of the leg is folded slightly so the leg sits nicely against the body. 

Back Leg
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: SCx24 (24)
Round 6: SC2togx6, SCx12 (18)
Round 7: SC2togx3, SCx12 (15)
Round 8 - 13: SCx15 (15, 6 rounds)
Round 14: 2SCx6, SCx9 (21)
Round 15: [2SC, SC]x6, SCx9 (27)
Round 16 - 21: SCx27 (27, 6 rounds) 
Stuff firmly and sew to the back half of the body. Similar to the front leg, fold over the inner part slightly to get the leg to sit nicely against the body. 


Claws
Blue - Make 16
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Sew to the feet/legs. Sew 3 to the frount of the paw and one on the back of the leg. 

Tail
Blue - Make 2
Chainx5
Row 1: From the 2nd chain from the hook, SCx4, chain and turn (4)
Row 2 - 3: SCx4, chain and turn (4, 2 rows)
Row 4: 2SC, SCx3, chain and turn (5)
Row 5 - 6: SCx5, chain and turn (5, 2 rows)
Row 7: SCx4, 2SC, chain and turn (6)
Row 8 -9: SCx6, chain and turn (6, 2 rows)
Row 10: 2SC, SCx5, chain and turn (7)
Row 11 - 12: SCx7, chain and turn (7, 2 rows)
Row 13: 2SC, SCx5, 2SC, chain and turn (9)
Row 14 - 15: SCx9, chain and turn (9, 2 rows) 
Row 16: SC2tog, SCx7, chain and turn (8)
Row 17: SCx8, chain and turn (8)
Row 18: SC2tog, SCx6, chain and turn (7)
Row 19: SCx7, chain and turn (7)
Row 20: SC2tog, SCx5, chain and turn (6)
Row 21: SCx6, chain and turn (6)
Row 22: SC2tog, SCx2, SC2tog, chain and turn (4)
Row 23: SCx4, chain and turn (4)
Row 24: SC2tog, SCx2, chain and turn (3) 
Row 25: SCx3, chain and turn (3)
Row 26: SC2tog, SC, chain and turn (2)
Row 27: SC2tog.
Finish off with a long tail on both pieces. Hold the pieces flat together and use each tail to sew down one side. You may wish to add a popstick or pipecleaners for strength. Sew onto the back of the plush. 


Comments

Popular posts from this blog

Clefairy (Pokedoll style)

Hello! I come with another pattern that isn't being added to the pokedex library as this one is done in pokedoll (cute and round) style rather than based on the original dex image. But this one is really quick and easy to work up! I made this with DK weight yarn and my usual 4.00 size hook. The plush works up to be 18cm (7 inches) tall and 21cm (about 8 1/2 inches) arm span! Body Round 1: CH2, SCx6 in the 2nd stitch from the hook (6) Round 2: 2SCx6 (12) Round 3: [2SC, SC]x6 (18) Round 4: [2SC, SCx2]x6 (24) Round 5: [2SC, SCx3]x6 (30) Round 6: [2SC, SCx4]x6 (36) Round 7: [2SC, SCx5]x6 (42) Round 8: [2SC, SCx6]x6 (48) Round 9: [2SC, SCx7]x6 (54) Round 10: [2SC, SCx8]x6 (60) Round 11: [2SC, SCx9]x6 (66) Round 12: [2SC, SCx10]x6 (72) Round 13 - 26: SCx72 (72, 14 rounds) Round 27: [SC2tog, SCx10]x6 (66) Round 28: [SC2tog, SCx9]x6 (60) Round 29: [SC2tog, SCx8]x6 (54) Round 30: [SC2tog, SCx7]x6 (48) Round 31: [SC2tog, SCx6]x6 (42) Ro

#778 Mimikyu

Hello all!! I've been mysteriously quiet lately but I've been very productive. Just lazy when it comes to actually resizing my images and putting these patterns up. I have a backlog of actual patterns to put up so I'll work through them slowly. I figure I would come back with one that a lot of people have been happy with. This Mimikyu is 30.5cm (12 inches) tall from base to the tip of its crooked ear. Features are needlefelted on and everything is sewn on and attached so there are no hard parts.  Head/Body Round 1: CH2, SCx6 in the 2nd stitch from the hook (6) Round 2: 2SCx6 (12) Round 3: [2SC, SC]x6 (18) Round 4: [2SC, SCx2]x6 (24) Round 5: [2SC, SCx3]x6 (30) Round 6: [2SC, SCx4]x6 (36) Round 7: [2SC, SCx5]x6 (42) Round 8: [2SC, SCx6]x6 (48) Round 9: [2SC, SCx7]x6 (54) Round 10: [2SC, SCx8]x6 (60) Round 11 - 20: SCx60 (60, 10 rounds) Round 21: [SC2tog, SCx8]x6 (54) Round 22: [SC2tog, SCx7]x6 (48) Round 23: [SC2tog, SCx6]x6 (42)  

#725 Litten

Hey all! Sorry for being slow! I have had quite a few patterns that I've been sitting on while I worked on new projects so I'm slowly going to post them all over the following weeks starting with this black fire cat! Litten length nose to tail end: 30.5cm (12 inches) and height going from tip of the ear down to feet: 26cm (10 inches) tall. Made from DK weight yarn and a little bit of felting materials for the eyes. Or you can just felt down yarn or even just embroider on the eyes. I also used the felting tools to flatten down the forehead markings and the eyes. Head Round 1: CH2, SCx6 in the 2nd stitch from the hook (6) Round 2: 2SCx6 (12) Round 3: [2SC, SC]x6 (18) Round 4: [2SC, SCx2]x6 (24) Round 5: [2SC, SCx3]x6 (30) Round 6: [2SC, SCx4]x6 (36) Round 7: [2SC, SCx5]x6 (42) Round 8: [2SC, SCx6]x6 (48) Round 9: [2SC, SCx7]x6 (54) Round 10: [2SC, SCx8]x6 (60) Round 11 - 16: Scx60 (60, 6 rounds) Round 17 - 18: SCx10, change to red/orange