Skip to main content

#778 Mimikyu

Hello all!!

I've been mysteriously quiet lately but I've been very productive. Just lazy when it comes to actually resizing my images and putting these patterns up. I have a backlog of actual patterns to put up so I'll work through them slowly. I figure I would come back with one that a lot of people have been happy with.



This Mimikyu is 30.5cm (12 inches) tall from base to the tip of its crooked ear. Features are needlefelted on and everything is sewn on and attached so there are no hard parts. 

Head/Body
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: [2SC, SCx3]x6 (30)
Round 6: [2SC, SCx4]x6 (36)
Round 7: [2SC, SCx5]x6 (42)
Round 8: [2SC, SCx6]x6 (48)
Round 9: [2SC, SCx7]x6 (54)
Round 10: [2SC, SCx8]x6 (60)
Round 11 - 20: SCx60 (60, 10 rounds)
Round 21: [SC2tog, SCx8]x6 (54)
Round 22: [SC2tog, SCx7]x6 (48)
Round 23: [SC2tog, SCx6]x6 (42)  
Round 24: [SC2tog, SCx5]x6 (36)
Round 25: [SC2tog, SCx4]x6 (30)
Row 1: SCx10 chain and turn
Row 2: SCx9 chain and turn
Row 25: SCx9, slip the hook into the next stitch round 25 and continue crocheting to the end of the round, SCx20 (30)
Stuff the head lightly and then continue crocheting next round. In round 26, crochet the next stich and then pick up the first stitch on the next step up. This creates the little head tilt.
Round 26 - 27: SCx30 (30, 2 rounds)
Round 28: [2SC, SCx4]x6 (36)
Round 29 - 30: SCx36 (36, 2 rounds)
Round 31: [2SC, SCx5]x6 (42)
Round 32 - 33: SCx42 (42, 2 rounds)
Round 34: [2SC, SCx6]x6 (48)  
Round 35 - 37: SCx48 (48, 3 rounds)
Round 38: [2SC, SCx7]x6 (54)
Round 39 - 41: SCx48 (54, 3 rounds)
Round 42: [2SC, SCx8]x6 (60)
Round 43 - 45: SCx60 (60, 3 rounds)
Round 46: [SC2tog, SCx8]x6 (54) Back Loop Only and switch to black on the last stitch.
Stuff the body firmly.
Round 47: [SC2tog, SCx7]x6 (48)  
Round 48: [SC2tog, SCx6]x6 (42)
Round 49: [SC2tog, SCx5]x6 (36)
Round 50: [SC2tog, SCx4]x6 (30)
Round 51: [SC2tog, SCx3]x6 (24)
Round 52: [SC2tog, SCx2]x6 (18)
Round 53: [SC2tog, SC]x6 (12)
Round 54: SC2togx6 (6)




Triangle flaps
Make 10 - yellow
Make 10 - black
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Round 3: [2SC, SC]x3 (9)
Round 4 - 5: SCx9 (9, 2 rounds)
Round 6: [2SC, SCx2]x3 (12)
Round 7 - 8: SCx12 (12, 2 rounds)
Flatten and sew the yellow triangles to the leftover loops. I also sew the front of the triangle to the next round up for support and sew the triangles to each other to make the fit look nicer. Then sew the black triangles in between the yellow ones.



Black Tail Shadow
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3 - 11: SCx12 (12, 9 rounds) =12345678
Sew underneath the back yellow triangle.

Tail
Chain 16
Round 1: From the 2nd chain from the hook, SCx14, 3SC, (turn the piece around and crochet using the leftover hooks on the other side), Scx14, 3SC (34)
Round 2 - 7: SCx34 (34, 6 rounds)
Stuff and sew closed. Leave a tail.

Chainx12
Round 1: From the 2nd chain from the hook, SCx10, 3SC, (turn the piece around and crochet using the leftover hooks on the other side), SCx10, 3SC (26)
Round 2 - 5: SCx26 (26, 4 rounds)
Stuff and sew closed. Leave a tail.

Chainx8
Round 1: From the 2nd chain from the hook, SCx6, 3SC, (turn the piece around and crochet using the leftover hooks on the other side), SCx6, 3SC (18)
Round 2 - 5: SCx18 (18, 4 rounds)  
Stuff and sew closed. Leave a tail.

Sew the three pieces together to form the zig zag shape tail and then sew onto the tip of the back yellow piece as well as the black shadow underneath. If you like, can also sew a stitch joining the tail onto the back of the mimikyu to hold the tail up. The stuffed tail that I make does stand up on its own without needing the extra stitch.




Ears
Yellow
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4 - 9: SCx18 (18, 6 rounds)
Round 10:  [2SC, SCx2]x6 (24)  
Round 11 - 14: SCx24 (24, 4 rounds)
Stuff firmly and sew both onto the head.

Black
Right ear when the mimikyu is facing towards yourself
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Round 3: [2SC, SC]x3 (9)
Round 4: SCx9 (9)
Round 5:  [2SC, SCx2]x3 (12)
Round 6: SCx12 (12)
Round 7: [2SC, SCx3]x3 (15)
Round 8: SCx15 (15)
Round 9: [2SC, SCx4]x3 (18)
Round 10: SCx18 (18)
Row 1: SCx9 chain and turn
Row 2: SCx8 chain and turn
Row 3: SCx7 chain and turn
Row 4: SCx6 chain and turn
Round 11: SCx6, SC in the next stitch on the next row down and then again into the main round, then SCx9 back to the beginning of the round.
Round 12: SCx18 (picking up the stitches on the stepped rows going up and then around) (18)
Round 13: SCx18(18)
Round 14: SC, HDC, DC, TCx2, DC, HDC, SCx4, HDC, DCx2, HDC, SCx3 (18)
Stuff firmly and sew onto the ear at an angle.

Black
Left Ear when mimikyu is facing towards you
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Round 3: 2SCx2, SCx4 (8)
Round 4: 2SC, SCx7 (9)
Round 5: HDCx4, SCx5 (9)
Round 6: SC2togx2, SCx5 (7)
Round 7: SCx5, 2SCx2 (9)
Round 8: SC, HDCx3, SC, 2SCx3, SC (12)
Round 9: SCx12 (12)
Round 10: HDCx6, SCx6 (12)
Round 11: SCx4, 2SCx3, SCx5 (15)
Round 12: SCx5, 2SCx3, SCx7 (18)
Round 13 - 14: SCx4, HDCx10, SCx4 (18. 2 rounds)  
Stuff lightly (ensuring you keep the shaping of the increase/decrease stitches) and sew onto the to of the left ear.



Comments

  1. I'll definitely be trying this pattern soon enough

    ReplyDelete
  2. Thank you for this pattern! It's great! My brother in law will love this!!

    ReplyDelete
  3. Voy a intentar hacer a Mimikyu inmediatamente <3

    ReplyDelete
  4. Service gui hang quoc te safe, convenient and quick time from 3 to 5 days

    ReplyDelete

Post a Comment

Popular posts from this blog

Clefairy (Pokedoll style)

Hello! I come with another pattern that isn't being added to the pokedex library as this one is done in pokedoll (cute and round) style rather than based on the original dex image. But this one is really quick and easy to work up! I made this with DK weight yarn and my usual 4.00 size hook. The plush works up to be 18cm (7 inches) tall and 21cm (about 8 1/2 inches) arm span! Body Round 1: CH2, SCx6 in the 2nd stitch from the hook (6) Round 2: 2SCx6 (12) Round 3: [2SC, SC]x6 (18) Round 4: [2SC, SCx2]x6 (24) Round 5: [2SC, SCx3]x6 (30) Round 6: [2SC, SCx4]x6 (36) Round 7: [2SC, SCx5]x6 (42) Round 8: [2SC, SCx6]x6 (48) Round 9: [2SC, SCx7]x6 (54) Round 10: [2SC, SCx8]x6 (60) Round 11: [2SC, SCx9]x6 (66) Round 12: [2SC, SCx10]x6 (72) Round 13 - 26: SCx72 (72, 14 rounds) Round 27: [SC2tog, SCx10]x6 (66) Round 28: [SC2tog, SCx9]x6 (60) Round 29: [SC2tog, SCx8]x6 (54) Round 30: [SC2tog, SCx7]x6 (48) Round 31: [SC2tog, SCx6]x6 (42) Ro

#725 Litten

Hey all! Sorry for being slow! I have had quite a few patterns that I've been sitting on while I worked on new projects so I'm slowly going to post them all over the following weeks starting with this black fire cat! Litten length nose to tail end: 30.5cm (12 inches) and height going from tip of the ear down to feet: 26cm (10 inches) tall. Made from DK weight yarn and a little bit of felting materials for the eyes. Or you can just felt down yarn or even just embroider on the eyes. I also used the felting tools to flatten down the forehead markings and the eyes. Head Round 1: CH2, SCx6 in the 2nd stitch from the hook (6) Round 2: 2SCx6 (12) Round 3: [2SC, SC]x6 (18) Round 4: [2SC, SCx2]x6 (24) Round 5: [2SC, SCx3]x6 (30) Round 6: [2SC, SCx4]x6 (36) Round 7: [2SC, SCx5]x6 (42) Round 8: [2SC, SCx6]x6 (48) Round 9: [2SC, SCx7]x6 (54) Round 10: [2SC, SCx8]x6 (60) Round 11 - 16: Scx60 (60, 6 rounds) Round 17 - 18: SCx10, change to red/orange