Skip to main content

#472 Gliscor

While I'm on a small roll right now, I also have a gliscor pattern that I've been holding onto for a few months now.

I wrote this particular pattern back when I had a little more time so I have more photos than in my more recent postings.

If you like the patterns on my blog, you may consider to:
Buy Me a Coffee at ko-fi.com

And here we go with the pattern!

Inside of Mouth
pink
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: SCx24 (24)
Leave a tail to sew into the mouth.

Head
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: [2SC, SCx3]x6 (30)
Round 6: [2SC, SCx4]x6 (36)
Round 7: [2SC, SCx5]x6 (42)
Round 8: [2SC, SCx6]x6 (48)
Round 9 - 12: SCx48 (48, 4 rounds)
Round 13: SCx10, CHx12, skip 12 stitches, SCx26 (48)
Round 14: SCx48 (48)
Round 15: [SC2tog, SCx6]x6 (42)
Sew the pink mouth piece into the mouth area (where the skipped stitches are).
Round 16: [SC2tog, SCx5]x6 (36)
Round 17: [SC2tog, SCx4]x6 (30)
Round 18: [SC2tog, SCx3]x6 (24)
Round 19: [SC2tog, SCx2]x6 (18)
Stuff firmly and around the mouth piece so the pink insert sits nicely.
Round 20: [SC2tog, SC]x6 (12)
Round 21: SC2togx6 (6)
Leave a tail to sew the head to the collar piece later.

Ears
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Round 3: 2SCx6 (12)
Round 4 - 5: SCx12 (12, 2 rounds)
Round 6: [2SC, SC]x6 (18)
Round 7 - 8: SCx18 (18, 2 rounds)
Round 9: [2SC, SCx2]x6 (24)
Round 10 - 11: SCx24 (24, 2 rounds)
Round 12: [2SC, SCx3]x6 (30)
Round 13 - 17: SCx30 (30, 5 rounds)
Sew onto the head.

Inner Ear
Dark Pink
Chainx11
Row 1: From the 2nd chain from the hook, SCx10, chain and turn (10)
Row 2 - 4: SCx10, chain and turn (10, 3 rows)
Row 5: SC2tog, SCx6, SC2tog, chain and turn (8)
Row 6: SCx8 chain and turn (8)
Row 7: SC2tog, SCx4, SC2tog chain and turn (6)
Row 8: SCx6 chain and turn (6)
Row 9: SC2tog, SCx2, SC2tog chain and turn (4)
Row 10: SCx4, chain and turn (4)
Row 11: SC2togx2, chain and turn (2)
Row 12: SC2tog
Leave a tail. Surface crochet or embroider two lines along the pink ear piece either in a darker pink or black. Then use the tail to sew this piece inside the main ear piece.

Eyes
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: 2SCx3, SCx3, 2SCx3, SCx3 (18)
Sew onto the head and then felt on black lines for the eye detailing.



Collar Piece
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: [2SC, SCx3]x6 (30)
Round 6: [2SC, SCx4]x6 (36)
Round 7: [2SC, SCx5]x6 (42)
Round 8: [2SC, SCx6]x6 (48)
Round 9: [2SC, SCx7]x6 (54)
Round 10: [2SC, SCx8]x6 (60)
Round 11 - 12: SCx60 (60, 2 rounds)
Leave a long tail. Fold in half and then sew the head onto the front half. Make sure the tail left over from the collar piece is facing towards the back half as this is used to sew the back piece onto the black wings at the end. Surface crochet some black lines or needlefelt the lines on.

Collar Extensions/Spikes
In same purple colour
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: Scx6 (6)
Round 3: [2SC, SC]x3 (9)
Round 4 - 9: SCx9 (9, 6 rounds)
Flatten and sew onto the collar.

Teeth
Make 2
Chainx6
Row 1: from the 2nd chain from the hook, SCx2, chx3 (then from the 2nd chain from the hook), SC, HDC, skip 1 back on the row and SC, Chx3, (then from the 2nd chain from the hook) SC, HDC and finish off. 
Use the short tail from the start and tie that to the long tail left at the end. The SCx2 at the start should be tilted when sewn into the mouth to form a tiny tooth. 






Body
In the same shade as the inner ear colour - Dark Pink
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: [2SC, SCx3]x6 (30)
Round 6: [2SC, SCx4]x6 (36)
Round 7 - 12: SCx36 (36, 6 rounds)
Round 13: [SC2tog, SCx4]x6 (30)
Round 14: [SC2tog, SCx3]x6 (24)
Round 15 - 17: SCx24 (24, 3 rounds)
Round 18: [2SC, SCx3]x6 (30)
Round 19: [2SC, SCx4]x6 (36)
Round 20: SCx36 (36)
Round 21:  [SC2tog, SCx4]x6 (30)
Round 22: [SC2tog, SCx3]x6 (24)
Round 23 - 25: SCx24 (24, 3 rounds)
Stuff lightly, making sure you keep the shape of where the decrease and increase rows are. Sew onto to the head underneath the shoulder piece that’s already sewn there. 
Surface crochet onto the body marking lines like on the ear inner piece.




Bottom Cover
purple
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: [2SC, SCx3]x6 (30)
Round 6: [2SC, SCx4]x6 (36)
Round 7 - 10: SCx36 (36, 4 rounds)
Row 1: SC2tog, SCx32, SC2tog, chain and turn (34)
Row 2: SC2tog, SCx30 , SC2tog, chain and turn (32)
Row 3: [SC2tog, SCx4]x5, SCx2, chain and turn  (26)
Row 4: [SC2tog, SCx3]x5, SCx2, chain and turn  (20)
Wrap around the bottom of the body part and sew down.

Tail and Leg Pieces
Purple - Make 6
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4 - 6: SCx18 (18, . rounds)
Round 7: [SC2tog, SC]x6 (12)
Stuff firmly
Round 8: SC2togx6 (6)
Sew closed and leave a tail for attaching
Sew two on either side of the bottom of the body and then attach the remaining 4 on the bottom of the body to form the tail.

Bottom tail piece
purple
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: [2SC, SC]x6 (18)
Round 4: [2SC, SCx2]x6 (24)
Round 5: [2SC, SCx3]x6 (30)
Round 6: [2SC, SCx4]x6 (36)
Round 7 - 12: SCx36 (36, 6 rounds)
Round 13: [SC2tog, SCx4]x6 (30)
Round 14: [SC2tog, SCx3]x6 (24)
Round 15: [SC2tog, SCx2]x6 (18)
Stuff firmly.
Round 16: [SC2tog, SC]x6 (12)
Sew onto the last ball for the tail. 

Spikes Tail piece
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: [2SC, SC]x3 (9)
Round 3: [2SC, SCx2]x3 (12)
Round 4: SCx12 (12)
Round 5 - 7: SCx12 (12, 3 rounds)
Stuff firmly and sew onto the bottom of the bottom tail piece.

Feet
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: [2SC, SC]x3 (9)
Round 3: [2SC, SCx2]x3 (12)
Round 4 - 7: SCx12 (12, 4 rounds)
Stuff firmly
Round 8: SC2togx6 (6)
Sew closed and then sew sideways onto the leg pieces.

Toes 
Make 4
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2 - 3: SCx6 (6. 2 rounds)
Flatten and sew onto the feet one on each side of the point at the top.








Wings
Row 1: CH2, SCx3 in the 2nd stitch from the hook, chain and turn (3)
Row 2: 2SCx3, chain and turn (6)
Row 3: [2SC, SC]x3, chain and turn (9)
Row 4: [2SC, SCx2]x3, chain and turn (12)
Row 5: [2SC, SCx3]x3, chain and turn (15)
Row 6: [2SC, SCx4]x3, chain and turn (18)
Row 7: [2SC, SCx5]x3, chain and turn (21)
Row 8: [2SC, SCx6]x, chain and turn (24)
Row 9: [2SC, SCx7]x3, chain and turn (27)
Row 10: [2SC, SCx8]x3. chain and turn (30)
Row 11: [2SC, SCx9]x3, chain and turn (33)
Row 12: [2SC, SCx10]x3, chain and turn (36)
Row 13: [2SC, SCx11]x3, chain and turn (39)
Row 14: [2SC, SCx12]x3, chain and turn (42)
Row 15: [2SC, SCx13]x3, chain and turn (45)
Row 16: [2SC, SCx14]x3, chain and turn (48)
Row 17: [2SC, SCx15]x3, chain and turn (51)
Row 18: [2SC, SCx16]x3, chain and turn (54)
Row 18: [2SC, SCx17]x3, chain and turn (57)
Row 19: [2SC, SCx18]x3 (60)
Row 20: Chain x4 (from the 2nd chain from the hook) SC, DC, TC (back on the main piece) Skip 2 stitches, SCx7, *Chain x4 (from the 2nd chain from the hook) SC, DC, TC (back on the main piece) Skip 2 stitches, SCx8* [repeat from * to * 4 times] Chain x4 (from the 2nd chain from the hook) SC, DC, TC (back on the main piece) Skip 2 stitches, SCx7, Chain x4 (from the 2nd chain from the hook) SC, DC, TC (back on the main piece) Skip 2 stitches, SC (60)

I then cut 7 pipe cleaners and crochet little tubes of black to cover each one. Then I would sew the pipe cleaners on the wing to each of the black points and along the wing to give it raised definition, also use this thread to sew the gaps of the points to the wings where the skip stitches are. 

I would then use the thread from each of these sections to weave through and sew to the halfway points between each wing point. Then pull tight. This pulls the midpoints between each wing tight and make it look more wing like. 

My pipe cleaner tubes are:
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2 - ??: SCx6 
Just keep crocheting around until the tube is long enough to cover the pipe cleaner.

Use the leftover purple thread from the collar piece to sew to the wing.

Back Pieces
Purple
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Round 3: 2SCx6 (12)
Round 4 - 5: SCx12 (12, 2 rounds)
Round 6: [2SC, SC]x6 (18)
Round 7 - ??: SCx18 (18, ?? rounds)
From round 7 just keep crocheting in the round until this piece fits up the back of the purple collar part. The point up to about round 4 should cover some of the black wing part. Stuff lightly and flatten a little so that it only sticks out slightly and sew onto the back collar.

Purple
make 2
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2 - 3: SCx6 (6, 2 rounds)
Sew one on either side of the main back piece.





Claws
Make 2
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: 2SCx6 (12)
Round 3: SCx12 (12)
Round 4: [2SC, SC]x6 (18)
Round 5 SCx18 (18)
Round 6: [2SC, SCx2]x6 (24)
Round 7: SCx24 (24)
Round 8: [2SC, SCx3]x6 (30)
Round 9 - 16: SCx30 (30, 8 rounds) 
Round 17: [SC2tog, SCx3]x6 (24) 
Round 18: [SC2tog, SCx2]x6 (18)
Round 19: [SC2tog, SC]x6 (12)
Leave a tail and finish off and then repeat from Round 1 to start the other half of the claw except this time don’t finish off and continue onto the next round.

Round 20: Insert the crochet hook onto the next stitch of the first piece SCx6, then skip 6 stitches on the current piece and  insert the hook, SCx6 (12)
Round 21 - 22: SCx12 (12, 2 rounds)
Round 23: SC2togx6 (6)
Use the long tail from the first piece to sew the inside of the claw pieces together. Stuff the little pocket created by round 20 - 24. The rest of the claw pieces should be flattened. Sew closed to finish and leave a long tail.
The second tail is used to sew onto the arm.

Claw Pointy Bits
Make 10
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2: SCx6 (6)
Round 3: [2SC, SC]x3 (9)
Round 4 - 5: SCx9 (9, 2 rounds)
Pick which claw you want as top and bottom piece (they’re the same but one might sit better as the bottom piece). The bottom piece will have a pointy bit sewn onto the tip (where round 1 is) and the top piece will have 2 pieces sewn onto each side hanging down. 

Arms
In the same dark pink colour as the inner ear/body pieces
Round 1: CH2, SCx6 in the 2nd stitch from the hook (6)
Round 2 - ??: SCx6
Keep crocheting in the round to make a tube long enough for the arm. Stuff lightly as you go. Sew the claw piece to the arm and then the arm to the body.

Gliscor is now done!



Comments

Popular posts from this blog

#778 Mimikyu

Hello all!! I've been mysteriously quiet lately but I've been very productive. Just lazy when it comes to actually resizing my images and putting these patterns up. I have a backlog of actual patterns to put up so I'll work through them slowly. I figure I would come back with one that a lot of people have been happy with. This Mimikyu is 30.5cm (12 inches) tall from base to the tip of its crooked ear. Features are needlefelted on and everything is sewn on and attached so there are no hard parts.  Head/Body Round 1: CH2, SCx6 in the 2nd stitch from the hook (6) Round 2: 2SCx6 (12) Round 3: [2SC, SC]x6 (18) Round 4: [2SC, SCx2]x6 (24) Round 5: [2SC, SCx3]x6 (30) Round 6: [2SC, SCx4]x6 (36) Round 7: [2SC, SCx5]x6 (42) Round 8: [2SC, SCx6]x6 (48) Round 9: [2SC, SCx7]x6 (54) Round 10: [2SC, SCx8]x6 (60) Round 11 - 20: SCx60 (60, 10 rounds) Round 21: [SC2tog, SCx8]x6 (54) Round 22: [SC2tog, SCx7]x6 (48) Round 23: [SC2tog, SCx6]x6 (42)  

Clefairy (Pokedoll style)

Hello! I come with another pattern that isn't being added to the pokedex library as this one is done in pokedoll (cute and round) style rather than based on the original dex image. But this one is really quick and easy to work up! I made this with DK weight yarn and my usual 4.00 size hook. The plush works up to be 18cm (7 inches) tall and 21cm (about 8 1/2 inches) arm span! Body Round 1: CH2, SCx6 in the 2nd stitch from the hook (6) Round 2: 2SCx6 (12) Round 3: [2SC, SC]x6 (18) Round 4: [2SC, SCx2]x6 (24) Round 5: [2SC, SCx3]x6 (30) Round 6: [2SC, SCx4]x6 (36) Round 7: [2SC, SCx5]x6 (42) Round 8: [2SC, SCx6]x6 (48) Round 9: [2SC, SCx7]x6 (54) Round 10: [2SC, SCx8]x6 (60) Round 11: [2SC, SCx9]x6 (66) Round 12: [2SC, SCx10]x6 (72) Round 13 - 26: SCx72 (72, 14 rounds) Round 27: [SC2tog, SCx10]x6 (66) Round 28: [SC2tog, SCx9]x6 (60) Round 29: [SC2tog, SCx8]x6 (54) Round 30: [SC2tog, SCx7]x6 (48) Round 31: [SC2tog, SCx6]x6 (42) Ro

#725 Litten

Hey all! Sorry for being slow! I have had quite a few patterns that I've been sitting on while I worked on new projects so I'm slowly going to post them all over the following weeks starting with this black fire cat! Litten length nose to tail end: 30.5cm (12 inches) and height going from tip of the ear down to feet: 26cm (10 inches) tall. Made from DK weight yarn and a little bit of felting materials for the eyes. Or you can just felt down yarn or even just embroider on the eyes. I also used the felting tools to flatten down the forehead markings and the eyes. Head Round 1: CH2, SCx6 in the 2nd stitch from the hook (6) Round 2: 2SCx6 (12) Round 3: [2SC, SC]x6 (18) Round 4: [2SC, SCx2]x6 (24) Round 5: [2SC, SCx3]x6 (30) Round 6: [2SC, SCx4]x6 (36) Round 7: [2SC, SCx5]x6 (42) Round 8: [2SC, SCx6]x6 (48) Round 9: [2SC, SCx7]x6 (54) Round 10: [2SC, SCx8]x6 (60) Round 11 - 16: Scx60 (60, 6 rounds) Round 17 - 18: SCx10, change to red/orange